Are telescopic props the same as steel shores?

In the trade, telescopic prop, adjustable shore and steel prop often refer to the same family. State height and finish clearly in your quote request.

Which heights can I rent?

The Espada product family covers a standard 3–6 m working range. Heights available for rental are confirmed against stock and project need in the quote.

How is quantity calculated?

Quantity depends on slab area, formwork layout and load plan. The product-page estimator or telescopic prop calculator gives an approximation; final quantity is confirmed in the quote.

How is rental duration set?

Duration follows the project programme in months. Start and estimated return dates are written in the quote; extensions are reviewed separately.

What if I want to buy instead?

Use the telescopic prop product page for sales and SKU details. This page is for rental quotes.

Telescopic Prop Rental

Telescopic prop rental (adjustable shore / steel prop) provides temporary support under slab and beam formwork for the duration of your project.

Go to sales & technical details

What is telescopic prop rental?

A telescopic prop is a height-adjustable steel under-formwork support. Hire shores let you plan quantity and height mix for the project term without purchasing.

Typical uses

Slab formwork support
Beam formwork applications
Residential and commercial concrete works
Short- or mid-term shoring needs

Telescopic prop vs table scaffold

A telescopic prop is a single adjustable shore for point or varying-height support. Wide, repeating slabs often use unit-based table scaffolds, which are a separate rental category.

Go to table scaffold rental

System notes

Espada’s telescopic prop family is defined with Ø60 mm outer / Ø48 mm inner tubes, 3–6 m working heights and painted or galvanized finishes. Height, finish and quantity are confirmed in the rental quote.

Verified system information

Ürün Grubu: Kalıp Altı İskele Sistemleri
Dış boru: Ø60 mm çapında
İç boru: Ø48 mm çapında
Et kalınlığı: Standartta 2 - 2,5 - 3 - 3,5 - 4 mm ve özel kalınlık
Taban sacı: Standartta 3 - 4 - 5 mm ve özel kalınlık
Çalışma boyu: Standartta 3 metre ile 6 metre arası ve özel ölçü
Yüzey: Boyalı veya galvanizli
Başlık seçenekleri: Düz / U / T
Standartlar: TS EN 1065 sınıfı
Durum: Teklif ve teknik destek mevcut

Rental process

Clarify the need
Share construction scaffold or formwork rental need with project type, quantity/area, duration and location.
Get a quote
The right hire scaffold system and scope are confirmed in writing in the quote.
Plan delivery
Delivery and return dates and Türkiye-wide shipment are planned after quote approval.

What to share for a quote

Project type and use case
Estimated duration (start / end)
Approximate area, quantity or system need
Site city / district
Drawing or photo if available

For quantity estimates

Use the telescopic prop calculator for an approximation; final quantity is confirmed in the quote.

Telescopic prop calculator

Frequently asked questions

Are telescopic props the same as steel shores?
In the trade, telescopic prop, adjustable shore and steel prop often refer to the same family. State height and finish clearly in your quote request.
Which heights can I rent?
The Espada product family covers a standard 3–6 m working range. Heights available for rental are confirmed against stock and project need in the quote.
How is quantity calculated?
Quantity depends on slab area, formwork layout and load plan. The product-page estimator or telescopic prop calculator gives an approximation; final quantity is confirmed in the quote.
How is rental duration set?
Duration follows the project programme in months. Start and estimated return dates are written in the quote; extensions are reviewed separately.
What if I want to buy instead?
Use the telescopic prop product page for sales and SKU details. This page is for rental quotes.

Telescopic Prop